Glass ropes are fully made of glass fibers that have the following characteristics:
great tensile strength, low conductibility, they are soft and flexible.
Great Stability in steam and light acids, lubricants etc. Temperature
of use: 550 οC
FIBERGLASS BRAIDED ROPE
Braided form : square, round or tectangle
With oeramic fiber wool core or glass fiber wool core are available.
6x6 8x8 10x10 12x12 16x16 20x20 22x22 25x25 30x30 40x40 50x50
FIBERGLASS KNITTED ROPE
Without or with core are available
5 - 6 -8 -10 -12 -16 -20 -22 -25 -30
Fiberglass tape (plain) withstands temperatures up to 550 oC
Applications include wrapping steam tracer lines, hose piping, tadpole
tapes, gasketing, and curtains for high temperatures ovens.
Thickness: 3 mm
Thickness: 1.5mm- 3 mm
Width: 1 meters
Thickness: 2mm- 3mm-4mm-5mm-10mm
Width: 1 meter
gaskets are molded from a special composition that will positively stop
leakage that causes corrosion around handholes and manholes in steam boilers,
water heaters and air tanks. Topog-e gaskets are sufficiently resilient
to fill any uneven spots on the surfaces and seal openings completely.
They are molded to fit any shape openings and conform to the configuration
of both surfaces stop leaks immediately and continue to seal the entire
opening. No seepage or stalactites appear when topog-e gaskets are used.
Also very easy to remove leaving both surfaces clean and requiring comparatively
little work to put back in service. No chiseling or buffing required.
Size are available for any size and shape inspection plates. For steam
pressures to 25 bar temperature 230 oC
JOINT SHEET NON-ASBESTOS
This product is made from ''Kevlar'' aramid fiber mineral fiber, compressed
and calendered under high temperature and pressure into a sheet form.
It eliminates asbestos-rubber sheet essentially and thoroughly.
Temperature 350 oC
Length (mm) 1000
Width (mm) 1500
Thickness (mm) 0.5 -1.0 -1.5 -2.0 -2.5 -3.0 -4.0
JOINT SHEET NON ASBESTOS gasket
Diameter : ½ -3/4 -1'' -11/4 -11/2- 2'' -11/2 -3'' -4'' -5'' -6'''
Fiberglass PTFE packing
It is a packing capable of a wide variety of uses throughout a plant.
It may be used on water,
Steam, solvents, mild acids and alkalies, and slurries in pumps, expansion
joints, mixers and agritators to 260 oC bar 30 PH 3-11
Cotton grease packing
It is made of fine quality cotton fiber impregnated with high temperature
It is a valve and pump packing of proven performance in high pressure.
It is suitable for water- steam -oils -solvent vapours -abrasive media
Temperature : 100 oC pressure 40 bar
Asbestos packing with lubricate and graphite
For high temperature & high pressure valves
Application: steam -hot oils- cocks and cool blowers -petroleum-base
4Χ4 6Χ6 8Χ8 10Χ10 12Χ12 14Χ14 16Χ16 20Χ20 22Χ22 25Χ25 32Χ32